Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Drinking water after a well pump change (https://www.askmehelpdesk.com/showthread.php?t=415494)

  • Nov 12, 2009, 06:25 PM
    jrfife9801
    Drinking water after a well pump change
    Hello,
    We changed our well pump 5 days ago. Water is was clear later that first day and the chlorine smell gone after 2 days. How long till we can drink the water? How can we increase the water pressure? Thank you!
    Rebecca
  • Nov 12, 2009, 08:01 PM
    speedball1
    Quote:

    Originally Posted by jrfife9801 View Post
    Hello,
    We changed our well pump 5 days ago. Water is was clear later that first day and the chlorine smell gone after 2 days. How long till we can drink the water? How can we increase the water pressure? Thank you!
    Rebecca

    Your well was chlorinated. It should be OK to drink after the chlorine taste is gone.
    On a Square-D Pumptrol pump pressure switch, Turtn the larger spring.(#1) clockwise to raise [both] cut-on and cut-off pressures.

    In other words, adjusting the pressure on this spring shifts the whole operating range of the switch up or down, but keeps the difference between cut-in and cut-out the same, whatever it happens to be (typically it's about 20 psi from the factory.
    Turn the smaller spring.(#2) clockwise to raise the cut-out pressure only.
    In other words, adjusting the pressure on this spring shifts just the pump cut-out pressure up (clockwise) or down (counter-clockwise).
    This should give you the pressure you desire. Good luck, Tom

  • All times are GMT -7. The time now is 10:34 AM.