Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Kenmore Ultra Wash dishwasher won't start, red control lock light flashing (https://www.askmehelpdesk.com/showthread.php?t=411118)

  • Oct 30, 2009, 05:51 AM
    purrna2go
    Kenmore Ultra Wash dishwasher won't start, red control lock light flashing
    Kenmore Ultra Wash dishwasher won't start.
    The control lock red light (above the "start" pad) flashes when I press "start" or any of the control lights. The door is closed completely.
  • Oct 30, 2009, 06:39 AM
    tamme

    Unplug it. If this doesn't work try to push and hold the end of cycle button for at least 10 seconds
  • Oct 30, 2009, 07:37 AM
    purrna2go
    It worked!
    At first it did not, so I held down a succession of pads down for 10 secs, finally the red light went off and Ipushed the "start" and it started up. I never had to unplug (would have had to flip switch in basement). Brilliant, elegant, and many thanks.
  • Oct 30, 2009, 08:03 AM
    purrna2go
    Quote:

    Originally Posted by tamme View Post
    Unplug it. If this doesnt work try to push and hold the end of cycle button for at least 10 seconds

    Tamme, this worked beautifully! Thank you! I did not have to flip the switch or unplug, just held down a succession of keypads until the light turned off (each for 10 sec), then pushed "Start" and it worked. Thanks again! - Mary
  • Nov 17, 2009, 05:40 PM
    Fkucera
    I tried all other fixes to no avail. So I turned off the power to the dishwasher. Then I disassembled the washer door latch and noticed that it did not open and close very much. It was coated in sticky yuccy stuff. Then I washed it in hot soapy and water and blew it dry with my air compressor. Then I WD-40ed it and blew it out with my air compressor again. Now it opened and closed the electrical contacts very crisply and with a much wider angle. The door switch was not actuating fully and so the control panel was getting a "door not shut" code and would not turn the unit on. Then I turned the power back on and hit the start button... viola... it worked very well...
  • Sep 30, 2010, 06:31 AM
    ebernards
    Thank you SO much. I was losing my mind... just kept pushing and holding down buttons (after unplugging and that now working). Bless you!
  • Apr 28, 2012, 07:40 PM
    BobbieJeanne
    Kenmore Dishwasher Model 15819990. A red light keeps flashing at "lock on." I pressed the "No Heat Dry" for 4 seconds, 10 seconds and nothing changed. Didn't work. Unable to unplug the machine because I think the plug is behind the dishwasher and I can't pull the machine out. Please help if possible.
  • Apr 28, 2012, 08:17 PM
    BobbieJeanne
    I am losing my mind! No matter what I try, nothing works! Any ideas? Please & Thanks.
  • Apr 28, 2014, 06:43 PM
    Autogenious
    Thank you so much, I had to hold down one button at a time starting from the left to right each one for ten seconds and now it works like a charm.

  • All times are GMT -7. The time now is 07:48 PM.