I have a kenmore catalyst dryer about 3 to 5 yeas old. It just started to default to the high dry cycle/check lint screen flashing/constant beep until dry cycle is completed/and will not allow to change to any other settings. I pulled the plug overnight hoping that it will recycle itself but did not. Can any one help... :confused:

May sure that the vent hast is clear all the way to outside. Also pull lint screen out and check to see that all is clean inside

Hi
I have a Kenmore Elite dryer. While drying , it suddenly started beeping and would not 'reset' itself. Power off , and other attempts of resetting did not work. I did notice that even at Medium Heat that its currently at , the temperature inside the dryer is quite high (feel). Any help will be appreciated .