Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Math & Sciences (https://www.askmehelpdesk.com/forumdisplay.php?f=402)
-   -   Find standard form of ellipse given center and foci (https://www.askmehelpdesk.com/showthread.php?t=409867)

  • Oct 26, 2009, 01:55 PM
    jordo6889
    find standard form of ellipse given center and foci
    Find the equation in standard form of an ellipse with center at (0,0) minor axis of length 12, and foci at (0,-8) and (0,8).
  • Oct 26, 2009, 07:25 PM
    Nhatkiem
    Quote:

    Originally Posted by jordo6889 View Post
    Find the equation in standard form of an ellipse with center at (0,0) minor axis of length 12, and foci at (0,-8) and (0,8).

    the general standard form of an ellipse is



    where a and b are the radii of your major and minor axis.:)
  • Oct 27, 2009, 07:20 AM
    ebaines

    Nhatkiem's suggestion will let you determine the value of b, but to find a you need to use the fact that :



    where F is the distance from the center of the ellipse to the focal point(s).

    Also, don't forget that a and b are the lengths of the semi-major and semi-minor axes, respectively.
  • Oct 27, 2009, 09:13 AM
    Nhatkiem
    Quote:

    Originally Posted by ebaines View Post
    Nhatkiem's suggestion will let you determine the value of b, but to find a you need to use the fact that :



    where F is the distance from the center of the ellipse to the focal point(s).

    Also, don't forget that a and b are the lengths of the semi-major and semi-minor axes, respectively.

    hmm I always thought the definition for minor/major axis were dependent one which ones were longer, meaning the definition of a and b were interchangeable depending on lengths:confused: Been a while since I've done this ellipse.. boo.
  • Oct 27, 2009, 09:25 AM
    ebaines
    Quote:

    Originally Posted by Nhatkiem View Post
    hmm I always thought the definition for minor/major axis were dependent one which ones were longer, meaning the definition of a and b were interchangeable depending on lengths:confused: Been a while since ive done this ellipse .. boo.

    Yes - you are right - the a dimension is along the x axis, and the b along the y axis. If a > b then a is the semi-major axis length and b is the semi-minor length. I jumped ahead a bit and said that a is the semi-major and b the semi-minor, essentially giving away that the ellipse is stretched horizontaly (not vertically). The point I was trying to make was to distinguish between the minor axis length and the semi-minor laxis ength.

  • All times are GMT -7. The time now is 02:01 PM.