My monitor displays " No signal" after start up. It works fine on my friends monitor... what could be the problem. I have trieed dchanging the resolution on the monitor from the safe mode screen tono avail. Please help.I am at my wits end!
![]() |
My monitor displays " No signal" after start up. It works fine on my friends monitor... what could be the problem. I have trieed dchanging the resolution on the monitor from the safe mode screen tono avail. Please help.I am at my wits end!
There computer is not connected to the monitor. That could be because of a bad cable or the monitor may be broken. Changing the resolution isn't going to help.
If a friend's monitor works fine then you should check the monitor cable. Look for a bent or broken pin in the connector. If the monitor uses a cable that can be disconnected (some are hard-wired at the monitor end), get another monitor cable. If that doesn't work, your monitor is likely broken.
If monitor is working on another machine, it would indicate that your video card has taken a dump, replace video card
All times are GMT -7. The time now is 08:38 PM. |