Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Installing new sink, old pipes don't line up (https://www.askmehelpdesk.com/showthread.php?t=408002)

  • Oct 20, 2009, 12:47 PM
    LeViGiBsOn
    Installing new sink, old pipes don't line up
    We are redoing our bathroom. We took out the old vanity and have a new one... the old and new one are both 36" The new one has a counter with a pre-attached sink IN THE MIDDLE of the counter. I did not realizt that our old one had the sink to the right side of the vanity. So now my sink is in the middle, and the pipes are to the side... they are not lined up! What do I do! Is this fixable? Help! :)
  • Oct 20, 2009, 03:05 PM
    Milo Dolezal

    It is an easy fix...

    Water: Buy longer flexible water supply lines. Connect existing angle stop valves with new faucet.
    Waste: install 45 Ell coming out from the wall and direct drain towards new sink. If you need to make a sharp turn, install Long Sweep 90. Than, install new P-trap

    • All times are GMT -7. The time now is 07:52 PM.