I am firing the heater up for the first time. The ignition kicks in the pilot try’s to light, but the burners will not light. I do see a flame at the pilot when trying light. I think it is the ignition module, but I do not know how to test it.

I have tried to turn the thermostat to lowest setting to reset
I have check for loose wires
I confirmed the gas is on

Brand and EXACT model number?

Brand / Trane
Model # / YCC0301L0BA

I have taken the ignition module off and there are 2 components that are burnt.

If there are burnt components on the circuit board that will need to be replaced.