Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Shower faucet installation (https://www.askmehelpdesk.com/showthread.php?t=406153)

  • Oct 14, 2009, 10:37 PM
    dbrownfromky
    Shower faucet installation
    What size hole do I need to drill to install a single lever shower faucet?
  • Oct 15, 2009, 03:45 AM
    speedball1
    Quote:
    Originally Posted by dbrownfromky View Post
    what size hole do i need to drill to install a single lever shower faucet?
    Figure a 4 1/2" hole for the valve body. Your instruction sheet should tell you what the measures are. Good luck, Tom
  • Oct 15, 2009, 09:20 AM
    Milo Dolezal

    Agree with Tom: every faucet comes with instructions. Read them. Also, you can measure the trim plate. That tells you the maximum opening. Measure that plate, subtract 2" and cut.

    • All times are GMT -7. The time now is 01:45 PM.