Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   2000 Nissan Frontier (V6 3.3L) with Knocking Sensor Code Displayed (https://www.askmehelpdesk.com/showthread.php?t=402704)

  • Oct 4, 2009, 07:22 PM
    Grapefruit02478
    2000 Nissan Frontier (V6 3.3L) with Knocking Sensor Code Displayed
    We have had a knocking sensor code triggered on our Frontier on Bank 1 Sensor 1 and Bank 2 Sensor 1. We replaced all 4 oxygen sensors (Bank 1 Sensor 1, Bank 2 Sensor 1, Bank 1 Sensor 2 and Bank 2 Sensor 2) and the knocking sensor code has been triggered once again. I have put in Denso sensors and Bosch sensors and replaced them three times with the same result.

    It is now giving the following codes:
    P0325 (Knock Sensor 1 Circuit Malfuntion)
    P0131 (O2 Sensior B2 S1 Circuit Low Volt) and
    P0151 (O2S Low Volt (Bank 1 Sensor 1).

    What do you recommend our next steps to be?
  • Oct 4, 2009, 08:15 PM
    TxGreaseMonkey

    Have you tried replacing the Knock Sensor itself?
  • Oct 4, 2009, 09:07 PM
    Grapefruit02478
    No, I have not yet replaced the knocking sensor itself.
  • Oct 5, 2009, 06:09 AM
    TxGreaseMonkey

    The Knock Sensor, then, is likely the problem and should be replaced.

  • All times are GMT -7. The time now is 11:58 AM.