Would anyone have an idea why my 2004 dodge ram 2500 only blows cold on the driver side? Thanks for your help.
![]() |
Would anyone have an idea why my 2004 dodge ram 2500 only blows cold on the driver side? Thanks for your help.
There's a service bulletin out on this for the minivan. Take a look and see if this might apply to your Ram. If not, I would suspect a bad blend door actuator on the passenger side.
Passenger side heat/cool not responding to control
It has to do with the vent door located in your dash, it is made of plastic and is starting to break. If you have a master radiator shop near you they can fix this for you. If not you'll have to go to the dealer and just open your wallet. I have two rams , a 2002, 195000 miles and 2003 98000 miles both have had this problem and I got one fixed at the dealer (stupid) and the other fixed at master radiator. I will take my trucks there for this from now on. (every 3 years you may have to have this done) Love my Rams even with this little problem. :-))
All times are GMT -7. The time now is 03:49 PM. |