Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Garage door seņor blinking (https://www.askmehelpdesk.com/showthread.php?t=395785)

  • Sep 12, 2009, 01:36 PM
    jvogle
    Garage door seņor blinking
    Hi,

    I read that the problem with my garage door not closing could be a problem with the garage door seņor. If I hold down the control the door will shut but if I release it before it shuts then it will start to go up. I noticed that the light on the sending sensor is blinking.

    I was spraying the tracks with a spray because the door needed lubricant and I might have gotten it on the lens.

    CAN ANYONE TELL ME WHAT I MIGHT BE ABLE TO USE TO CLEAN THE LENS TO ENSURE THAT THIS IS NOT THE PROBLEM?

    Also how can I determine if a beam is being transmitted

    Thanks
    Jacquie
  • Sep 12, 2009, 03:02 PM
    crigby

    Hi,
    Some of them blink if not aligned, and will often stop when aligned. That is how the mechanics align them.
    Peace,
    Clarke

  • All times are GMT -7. The time now is 11:21 AM.