Help I have a 1991 honda accord that the key stays stuck in the crank position then it takes a bunch of jiggling and pushing and pulling to get it to spring back it also stays stuck in the off position and the key will not come out even in the off position I made a new key but it's the same problem I need to know how to change only the key cylinder and not the whole switch if you go to this site this and look up part number LC13580 this is what I'm changing thanks


AutoZone.com | Get In The Zone!

Read this link below:

https://www.askmehelpdesk.com/cars-t...tml#post224842

No that's not what I'm trying to change if you go to AutoZone.com | Get In The Zone! and look up part number LC13580 you will see what I'm trying to change but thank you very much

I'll be surprised if you don't have to follow the procedure above. Keep me posted.