Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Hampton Bay fan removal/replace (https://www.askmehelpdesk.com/showthread.php?t=390443)

  • Aug 25, 2009, 03:40 PM
    siftin
    2 Attachment(s)
    Hampton Bay fan removal/replace
    Hi, I am trying to remove this Hampton bay fan. I have attached pictures of before and after of this unit. I am unable to figure out how to remove the canopy from the ceiling. As you can see there was no rod used to connect the fan with canopy.
    I have tried to twist the canopy in both direction as well as try to break it using hammer, but it's made up of metal :)
    I am not sure if I need to go into attic to figure out, what's going on there. Any help/suggestion?
  • Aug 25, 2009, 04:21 PM
    ballengerb1

    No need to go to te attic. Can you take one more picture straight from the side so I can see between the motor and the canopy? Carefully inspect and attempt to pry the outer most ring of the canopy. Sometimes these are just friction fit rings which are covering 3 screws holding the canopy.
  • Aug 25, 2009, 04:30 PM
    siftin
    1 Attachment(s)
    Hi, attached is the side view image
    Model is 48-BB
  • Aug 25, 2009, 04:58 PM
    ballengerb1

    That was quick but did not help me. Did you try to pry on the outmost ring of the canopy, the part that touches the ceiling. This link tells you how to reach Hampton Bay (King of Fans) is the actual maker. https://www.askmehelpdesk.com/electr...ons-46738.html
  • Aug 26, 2009, 02:24 PM
    siftin
    Hi, I tried to pry the outermost ring, using a flat screw driver but it won't buzz. If you are sure that it's the way to do it, than I can hit it hard.
  • Aug 26, 2009, 02:27 PM
    ballengerb1

    No not sure so don't hit it. Many fans employ a ring to hide the mounting screws but not all. Try my last link and see if you can get installation instructions from King of Fans.
  • Sep 2, 2009, 06:53 PM
    ceilingfanrepair

    Usually the part closest to the ceiling twists off and uncovers the screws. It may be on really tight, try some WD40. Does it feel like plastic? JUST the part closest to the ceiling?

    You really destroyed the fan in taking it apart!
  • Sep 14, 2009, 10:43 AM
    siftin
    ballengerb1, thanks
    I was able to pry the outermost ring with a very fine edge screwdriver. It was deceptively close to the canopy.

    This fan motor broke down couple of months back, but it was still hanging on roof and teasing me. Now it goes in recycling :)
  • Sep 14, 2009, 10:53 AM
    ballengerb1

    They do a fairly good job hiding that ring. Glad you got it done.
  • Sep 14, 2009, 12:36 PM
    ballengerb1

    Come back anytime. There is another guy here Ceilingfanrepair who usuallyhandles the fan questions too.
  • Sep 14, 2009, 06:14 PM
    ceilingfanrepair

    You know, you could take the broken fan back to Home Depot, they SHOULD give you a new one under the lifetime warranty.

  • All times are GMT -7. The time now is 07:02 PM.