Hello, I have a Craftsman tractor. I just replaced the bracket and torsion spring that hold the shifter arm on. The tractor runs great in forward but will no longer go in reverse. Any ideas. Thanks, Deb

Hi,
Numbers always help; but these transaxles have gears for forward and a chain for reverse. A broken chain could cause this.
Peace,
Clarke

Since you just replaced the shifter bracket it is also possible that it is just out of adjustment. If I remember correctly the bracket is able to be moved back and forth once it is mounted and not completey tightened. You might try loosening the bolts and moving the bracket one way or the other to see if this helps.

Quote:

---

Originally Posted by jsfocke

Since you just replaced the shifter bracket it is also possible that it is just out of adjustment. If I remember correctly the bracket is able to be moved back and forth once it is mounted and not completey tightened. You might try loosening the bolts and moving the bracket one way or the other to see if this helps.

---

You were right! Thank you so much. I am now driving in both directions.

I have the same problem with the same mower. I have a busted cable and it seems odd theat it woul bust. Are both the cables for fron and reverse the same.7460935A

Quote:

---

Originally Posted by Bdover

I have the same problem with the same mower. I have a busted cable and it seems odd theat it woul bust. Are both the cables for fron and reverse the same.7460935A

---

Would you please give us the model number for your mower.

I have a 26 HP craftsman riding tractor. I began not wanting to engage in reverse about two weeks ago. Now it completely stopped going into gear at all. Could it be the drive belt or something else?

Typically the drive belt will not affect just one direction. I doubt that is it. Is this a 6 speed or a hydrostatic?

Quote:

---

Originally Posted by jsfocke

Typically the drive belt will not affect just one direction. I doubt that is it. Is this a 6 speed or a hydrostatic?

---

It is Hydrostatic, also when it completely stopped going into gear, the brake petel came all the way back as if a cable may have broken.

Quote:

---

Originally Posted by vic212

It is Hydrostatic, also when it completely stoped going into gear, the brake petel came all the way back as if a cable may have broken.

---

Any chance you have the model number available? I can figure it out a lot easier with that.

Quote:

---

Originally Posted by jsfocke

Any chance you have the model number available? I can figure it out a lot easier with that.

---

It is a gs 6500 26 HP Koler Craftsman. I don't have the actual number avaiable. I really appreciate your help.

Quote:

---

Originally Posted by jsfocke

Any chance you have the model number available? I can figure it out a lot easier with that.

---

It is a GS 6500 26 HP Koler Craftsman. I don't have the exact maodel number with me. Thank you very much for your help.

I just re-read your first post. It said that it didn't want to go into reverse at first and now it won't go into gear at all. Does that mean it will not go forward or reverse? If so, then it is possible that it could be a belt. Although they do not usually start to go out by not going into one or the other gear. I would be more likely to lean toward an issue in the transaxle. But, by all means check the belts first. (much cheaper repair... )

I am unfamiliar with the larger tractors like you have. Maybe one of the professional can offer a better opinion on this matter.

Sounds like your ground control spring could have came off or broke,this would keep the pedal from returning.
As far as not going into gear check make sure belt is in al pulleys and check adjusting link on hydro shifter ,make sure its still attached.

LUCK