2005 Dodge neon sxt will not start. Lights and everything work good, but when the key is turned the engine will not turn over. There is no click or any noise from the engine compartment ......pl:)ease help

I would check all fuses first, also need to check voltage to Starter when Key Turned.
I'm sure you're in Neutral.

Quote:

---

Originally Posted by Stratmando

I would check all fuses first, also need to check voltage to Starter when Key Turned.
I'm sure you're in Neutral.

---

I






I'm already check the fuses and the starter volgate they all OK... somebody told me maybe the ECU?. THANKS

Does engine turn over? Need to know is starter or Ignition problem?

Quote:

---

Originally Posted by Stratmando

Does engine turn over? need to know is starter or Ignition problem?

---

I check the starter its good...

Is it turning Over?

Quote:

---

Originally Posted by Stratmando

Is it turning Over?

---

Yes turning Over when I take the relay starter of and I jump the pin 30 and 87 pin

Will the engine run like that? If so, may be just the Relay, need to find what is missing(Switched from ignition switch, hot, ground, to starter solenoid)
Ground may be from a Neutral switch.

Quote:

---

Originally Posted by Stratmando

Will the engine run like that? If so, may be just the Relay, need to find what is missing(Switched from ignition switch, hot, ground, to starter solenoid)
Ground may be from a Neutral switch.

---

No the engine run like that... just crank the engine over but won't start

Sounds like you have a couple of Problems, I would look for a Main Fuse, I will check for a diagram. Any Codes?
You may want to look through here:
http://www.google.com/search?q=2005+...rlz=1I7GGLR_en
http://www.dodgeproblems.com/Neon/

Quote:

---

Originally Posted by Stratmando

Sounds like you have a couple of Problems, I would look for a Main Fuse, I will check for a diagram. Any Codes?
You may want to look through here:
2005 dodge neon sxt problems - Google Search
Dodge Problems.com - Dodge Neon Problems & Complaints

---

Thank you... but you think it's the ECU PROBLEM?

Sounds like it "could be", I am thinking that the Starter is NOT dependent on the ECU.
A wiring diagram will tell all.
Do you have the Shop Manual?
They save a lot of time and Money.
If you have One, follow the Starter on back to Ignition.

Quote:

---

Originally Posted by mancinibig

thank you ....but you think its the ecu problem?

---

Do you know where the main fuses located?

Could be Under Dash, In glove box, under the Hood, Maybe a Fusible Link.

Quote:

---

Originally Posted by stratmando

could be under dash, in glove box, under the hood, maybe a fusible link.

---

OK thanks again I'm going to that

This shows the Coil and the Contacts for that relay, see what's missing.
VWP - relays

Quote:

---

Originally Posted by Stratmando

This shows the Coil and the Contacts for that relay, see whats missing.
VWP - relays

---

So what do you think I should do?.
Thanks