The "Quick Rinse" light is flashing and no other buttons work. I've read the reset answers given for other models, but not for my model. I do not have a "Heat Dry" button. Does anyone know the reset code for this model?

If you take off the kick plate with 2 screws you should find the troubleshooting paperwork which tells you which buttons to push in the sequence to reset the machine.

Thanks, gzeman. I tried it, found the directions, but it didn't help. Thanks anyway, bigbee1

The diagnostics code is what other people have been using to reset their machines. It's usually heated dry, normal wash, heated dry, normal wash, heated dry, normal wash. This turns all the lights on then starts the machine in its diagnostic cycle. You then hit cancel and it should be ready to run. Unless there is something actually wrong with the machine.

Did you try the sequece they give you in the technicians paperwork?
Did you count the flashes and check the code against the function code list?

Yes, but there was no response at all on the display.