Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   The drive belt routing for a john deere 175 hydro (https://www.askmehelpdesk.com/showthread.php?t=383761)

  • Aug 5, 2009, 11:27 AM
    topherjn88
    The drive belt routing for a john deere 175 hydro
    I need a picture of the drive belt off a 175 john deere hydro, my belt blew-out so I have no image of original routing, I bought a new belt and managed to fit it in and around both the tranny an the driving pulley. But I can't manage to figure out the routing around the guide and idler pulleys positioned near the middle under the tractor. I am stuck and would appreciate any help but a picture would be the best help for me.
    -thank you!
  • Aug 5, 2009, 11:46 AM
    topherjn88

    Never mind I found a solution if you are in the same boat check this website out, it solved all my questions <http://outdoorpowerinfo.com/repairs/deere_175_drive_belt.asp>
  • Jul 19, 2010, 08:08 AM
    nathan81
    This doesn't look like my 175 hydro at all
  • Jul 19, 2010, 11:14 AM
    crigby
    1 Attachment(s)
    Hi,
    Do you have one of the rare Kanzaki(TuffTorq) transaxles? Only the last production used them. Everything before used a mating of an Eaton pump/motor assembly to a Peerless transaxle/differential. That is what that link covers.
    If this is the case a bad picture is attached; the dashed line is the belt.
    Peace,
    Clarke

  • All times are GMT -7. The time now is 12:57 PM.