Hi I am Syed Ibramusha

I have 2 cisco router , How to map one router to another router can any person help me

Can they ping each other?
What is the LAN and WAN address of each router?

Hellow

My First router ip 192.1.55.1 and another router IP 192.1.56.1 .How to make communicate router?

This network is WAN Network

Take a look at the questions and answer them fully.
1) Can they ping each other?
2) What is the LAN and WAN address of each router?

You have not provided any answer for #1. How are they connected to each other? Is it through the PSTN with ISDN, T1/E1, etc. Are they connected on a private network within a building using your own cabling? They must have some sort of pathway for communication.

As far as answer #2 goes, you have only provided the LAN addresses and not the WAN addresses of the router. The WAN addresses may help to answer #1 and they are definitely required for the addition of static routes.

Hi,
I don't have any idea for config router so help me how to identify wan address, Lan address and how to differenciate 2 address tell me my questions

Why don't you start by telling us how your network is set up. Then maybe we'll have a better idea of what you need to do.

Quote:

---

Originally Posted by Syed Ibramusha

Hi,
I dont have any idea for config router so help me how to identify wan address, Lan address and how to differenciate 2 address tell me my questions

---

Do you know how to logon to your Cisco routers? Do you know how to go to Privilaged mode (enable command)? You do a SHOW RUNNING in Privilaged mode to get the current router configuration. Copy this information to a text file and attach it to a post.

If you do not know how to logon to your Cisco routers or know what the Enable password is, then you will not be able to add the routes anyway. You may need to hire someone to do this for you.

Sorry This my mistake and I know small troubleshoot so I want lean how to config betweeb two router help me

Sorry teach step by step how to config between two router

Without the answers to the questions we have asked of you, you will NOT be able to configure the routes between the router. Also, some of the older Cisco routers do not use the same command line syntax that is used now so we are also assuming that what you have is using the more common Cisco IOS.

If you want a valid example of how to configure your routers, you need to fully answer questions 1 and 2 above.

I have cisco 1700 series so how to config tell some commands