I have a Hunter remote 85095-01 on my wall. Unfortunately I knocked it off the wall :( and now it won't work. I pulled the battery out, tested it and it's good, put it back in but still won't work. The red light does go on however. Can anyone offer a suggestion other than buying a new remote? I have a feeling they aren't cheap.

Thank you so much!

I believe the remote contains DIP switches to set the code---compatible with the fan's code.

You might want to check and see if the code is set correctly.

Look for a crack in the circuit board, on some of those, the circuit trace follows the corner, so if the corner chips off, trace can be broken
For repair, scrape trace, lay small wire across break and solder.

Check the dip switches to make sure they are seated properly and match the receiver.

New one shouldn't be that expensive, call Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats