Where is the starter located on a 96 accord

Just below and to the rear of the distributor. Follow the large red cable from the positive battery terminal--it will lead you right to the starter motor. Here's how to replace the starter:

1. Disconnect the negative battery cable.
2. Disconnect the starter cable from the "B" terminal on the solenoid, then the BLK/WHT wire from the "S" terminal.
3. Remove the two bolts holding the starter; then, remove the starter.
4. Install in the reverse order of removal.

NOTE: When installing the starter cable, ensure the crimped side of the ring terminal is facing out. It's a good idea to clean both terminals and connectors with #240 abrasive cloth and coat with dielectric grease.