Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Drip in Faucet (https://www.askmehelpdesk.com/showthread.php?t=379717)

  • Jul 25, 2009, 01:05 PM
    liverpoollady
    Drip in Faucet
    How can my single kitchen faucet continue to drip when the water to it is shut off
  • Jul 25, 2009, 02:17 PM
    speedball1
    Greetings from Sarasota Florida,
    I was in Liverpool back in the 40's when I sailed with the Merchant Marine.
    Does your faucet drip steady or just a while after you shut it off. If it's a steady drip I'll need a little information. One handle or two knobs? Brand name? How old?
    Drip hot or cold? Let me know, tom
  • Jul 25, 2009, 04:25 PM
    afaroo
    Quote:

    Originally Posted by liverpoollady View Post
    How can my single kitchen faucet continue to drip when the water to it is shut off

    Please tell us the brand and the model number of your single handle kitchen faucet, it will be an easy fix to replace the cartridge or the seals, Thanks.

    John
  • Jul 26, 2009, 08:59 AM
    liverpoollady
    Quote:

    Originally Posted by speedball1 View Post
    Greetings from Sarasota Florida,
    I was in Liverpool back in the 40's when I sailed with the Merchant Marine.
    Does your faucet drip steady or just a while after you shut it off. If it's a steady drip I'll need a little information. One handle or two knobs? Brand name? How old?
    Drip hot or cold? Let me know, tom

    The drip is steady. There are two knobs. It is a Master Plumber faucet. The water drip is cold.
  • Jul 26, 2009, 09:58 AM
    massplumber2008
    2 Attachment(s)
    HiLiverpoollady:

    If you are lucky this can be as simple as shutting the water supply off to the faucet (shutoffs below sink), removing the handle, loosening the nut and then removing the stem and washer assembly (or cup washer seated under the stem...

    See if you can shut water from below, remove handle and confirm the nut is present. The stem should look like the pic. Below. You will probably need to replace the cup washer and spring (see image).

    MARK

  • All times are GMT -7. The time now is 11:57 PM.