Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Remote control is no longer working accurately. (https://www.askmehelpdesk.com/showthread.php?t=377184)

  • Jul 18, 2009, 07:19 PM
    bjhaas
    Remote control is no longer working accurately.
    Romote control does not work to turn off the lights or stop the fan. We have installed a new battery in remote control and it still does not work
  • Jul 18, 2009, 07:20 PM
    bjhaas
    Are there parts that can be replaced to turn off the light and fan?
  • Jul 18, 2009, 07:37 PM
    ballengerb1

    Does the remote have a small red light, does it light up when a button is pushed?
  • Jul 19, 2009, 07:21 AM
    bjhaas

    The red light does light when the buttons are pushed
  • Jul 19, 2009, 02:54 PM
    ballengerb1

    Check to see if the hand held has small dip switches, compare their setting with the receivers switches in the canopy.
  • Jul 19, 2009, 02:56 PM
    artlady

    Maybe you need to reprogram since you removed the batteries?
    Just a guess,that is what I have to do with my TV remote when I change batteries.
  • Jul 19, 2009, 03:02 PM
    ballengerb1

    May be true with some remotes but not fans.
  • Jul 19, 2009, 03:15 PM
    ballengerb1

    Thanks for the greenie and I caught the guess part. You are fine but I did not want bjhass to start going in the wrong direction.
  • Jul 19, 2009, 03:18 PM
    artlady
    Quote:

    Originally Posted by ballengerb1 View Post
    Thanks for the greenie and I caught the guess part. You are fine but I did not want bjhass to start going in the wrong direction.

    Totally a guess ! Isn't there a website where he could get a copy of the manual for his remote in case he lost the original? Again,just guessing :)
  • Jul 20, 2009, 08:01 AM
    ballengerb1

    https://www.askmehelpdesk.com/electr...ons-46738.html This site gives many contacts but he has never told us a brand yet. Actually its been just you and me for the past 6 posts, bj you out there?
  • Jul 20, 2009, 09:01 AM
    bjhaas

    Thanks for your help. I'm going to check out the switches.
  • Jul 21, 2009, 12:37 AM
    ceilingfanrepair

    Check the dip switches, but it is probably the receiver. What make is the fan?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
  • Mar 5, 2010, 04:37 PM
    jfletch
    I have a Harbor Breeze, 56 in. Exeter Ceiling Fan. I had the remote on the table next to my chair. I looked over and saw the red light flashing like crazy. I had to remove something from on top of the Remote like a paperback book. The light kept flashing, so I pushed some of the buttons, thinking one of them was stuck or something. The flashing eventually quit, but when I push a button now, the red light comes on with no action at the fan. I've replaced the battery with a brand new one, but still nothing works. We had just turned the light on and off that same evening.

    Any informed guesses are welcome at this time.
  • Mar 6, 2010, 04:27 PM
    ceilingfanrepair

    Try a different dip switch setting (on the receiver AND remote). Try removing the battery for an extended period (an hour or two is fine) then replacing it. If it doesn't start working again, report back.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More

  • All times are GMT -7. The time now is 05:34 PM.