Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Submersible pump well,Dole flow control valve whistling (https://www.askmehelpdesk.com/showthread.php?t=374746)

  • Jul 12, 2009, 12:39 PM
    rotor2
    Submersible pump well,Dole flow control valve whistling
    Hi
    I have recently bought a home with a well system which is new terrain for me.. The line from the pump to the pressure tank has developed an intermittent whistle/high pitched hum that I have narrowed down to the Dole flow control valve. The whistling has gradually become more constant...

    The flow control valve is 4 GPM
    I don't know what model of submersible pump I have, but believe it to be a 1/2 HP gould.
    I lose volume and pressure with too much demand on the system ( A sprinkler zone and running a tap in the home )

    I am wondering if my pump is weak or if perhaps my well cannot keep up with the demand.
    Any help /suggestions would be appreciated...

    Thanks Troy
  • Oct 14, 2010, 09:35 AM
    wellman614
    Dole Valves always squeal a little when used with a submersible pump. The valve will not allow the pump to supply more than 4 gpm (that is why its there). You should ensure that you are not asking for more than 4 gpm. If you are not asking for more than 4 gpm and still losing pressure most likely you need a smaller dole valve because the well is not able to deliver 4 gpm.

  • All times are GMT -7. The time now is 01:17 AM.