I'm trying replace janitrol 18-60 thermostat with ritetemp 6022 .
System is 2 stage heatpump w/strip back-up
Janitrol inside has 2 mercury switches and wires configured like this:
Y G R O
W2
E C
W2 is white wire
E is Black wire
C is Blue wire
Y-yellow wire
G-green wire
R-red wire
O-orange wire
3 switches heat/cool,fan/auto, emergency switch/ normal
Ritetemp terminals:
C B O W2 W Y Y2 RH RC G A
Can you connect the dots for me?
No E in BLack, no C in BLue

Did the ritetemp not come with instruction manuel?
Go to Google and type in ritetemp 6022 . Full instructions are there

Goodluck,, let us know if you need any more help

Did we need two separate threads on this?

I guess not,, wmproop <<< is confused I guess,, I only see one question with one comment so far
But I doesn`t take a lot to confuse .

No there was two different threads by came posted.. must have deleted one.