Hey I have a Bush internet TV, and I need to activate the remote control again (just for changing the channel), as the batteries ran out. I remember having to hold in some of the buttons for an amount of time, and I was hoping someone might know the specifics or be able to direct me to somewhere I can find them?they are in the instruction manual, however I don't have that at my current address. Any help would be much appreciated!:o

You have to hold down left arrow, down arrow (I think - if not, up arrow), and right arrow together, then the number 1 key, for 5 seconds

Sorry yeah it did work perfectly, and the down arrow was the correct button :D thanks so much :D

I can't get this to work, do I have to hold all of these down at the same time? Or the number 1 after the arrows? Thanks

Flip open the remote control to get to the querty keypad. Hold down the left, down and right arrows and the number 1 for 5 seconds

Quote:

---

Originally Posted by 98sbonshor

hey i have a Bush internet tv, and i need to activate the remote control again (just for changing the channel), as the batteries ran out. i remember having to hold in some of the buttons for an amount of time, and i was hoping someone might know the specifics or be able to direct me to somewhere i can find them?they are in the instruction manual, however i dont have that at my current address. any help would be much appreciated!:o

---

Whot you do is hold in all together the left right and down arrows bottom right all together and then press one

Just bought whole unit in car boot are they any good

Thanks eric

Thanks, I thaught it would have been harder to findo out it on the internet but this was the first place I looked.