Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Pools - Spas & Saunas (https://www.askmehelpdesk.com/forumdisplay.php?f=261)
-   -   Pump Wiring (https://www.askmehelpdesk.com/showthread.php?t=371852)

  • Jul 4, 2009, 06:25 AM
    enzo711
    Pump Wiring
    How do you wire a Pentair 110V/220V 1HP pump to 110V? The diagram indicates connecting to BROWN at the top and L2. There is a brown wire on the bottom but no screw to connect to. The top wire is WHITE but again no screw to connect to. There are only two screws to connect to and they are labeled L1 and L2.
  • Jul 12, 2009, 06:12 PM
    bchbuumm
    Look at your diagram and if it show brown to L2 then you pull it off whatever tab its on and slide on a tab of L2... and the same goes for the other wire. Whatever the diagram shows.
  • Jul 16, 2009, 05:03 AM
    Stratmando

    Since you didn't give a Model#, do you see it here?:
    Pentair Water Pool and Spa

    • All times are GMT -7. The time now is 11:20 AM.