Replacing the deck belt on a johndeere sx95. Anyone know the correct threading procedure?

Thanks,

Mark

Hi,
Started answering this until I remembered that the SX95 can have a 30" (one blade) or 38" (two blades) deck.
Which one?
Peace,
Clarke

Hi Clarke,

It's a 38 " two blade deck.

Mark

Hi,
Took some effort to find some photos as the info is only for purchase at Deere and the parts breakdown, while fine for a mechanic to order parts from would be of little or no help.
Finally found two pictures, one from the front with a belt and one from the rear without.
Enjoy and good luck. Be aware of the guide on the transaxle and that the belt goes through he part of the loop nearest the bolt down point and the farthest end is a guide for the variable speed drive belt.
Peace,
Clarke

Not sure but maybe this will help too. john deere belt diagram - Google Image Search

This picture really helped I had belt run incorrectly, thank you for posting this picture where the belt runs across the front to the opposite and then back to the middle, I just finished mowing my yard.