I have a Coleman/Evcon furnace Mod #BGM08015C (No AC)

I would like to just run the fan to circulate the air in the house.

I can't figure out how to do this. Any help would be appreciatd.

Thanks much!

Take the door off the furnace, look on the left side for a small black rocker switch. Should say on off and fan.

Take the door off the furnace, look on the left side for a small black rocker switch. Should say on off and fan.

Thanks, I looked on the left side but don't see the switch. Is it on the motor?

Thanks again.

If you don't find the switch that he told you about then look at the fan and limit switch, some of them have a "fan on" switch on them.