Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Math & Sciences (https://www.askmehelpdesk.com/forumdisplay.php?f=402)
-   -   Final on gas laws and heat engines (https://www.askmehelpdesk.com/showthread.php?t=364901)

  • Jun 14, 2009, 01:06 PM
    Nargis786
    Final on gas laws and heat engines
    The annual world consumtions of coal and oil over the last 20 years of this century have been and are projected to be as follows:

    Coal - (1980) - 3150, (1985) - 3830, (1990) - 4660, (1995) - 5150, (2000) - 5680

    Oil - (1980) - 3910, (1985) - 3810, (1990) -3710, (1995) - 3530, (2000) - 3320

    All nummbers are in megatonnes of coal equivalent.
    It is suggested that the consumption of coal is rising exponentially. Explain how you would test this statement.
    Account briefly for the decline in oil consumption and indicate how this decline may be expected to be shared between developed and developing countries.
  • Jun 14, 2009, 02:32 PM
    Perito

    if the consumption is rising exponentially, you will see





    So, if you plot log(consumption) against log(T), you should get a straight line. The slope of the line is the exponent.
  • Jun 14, 2009, 03:22 PM
    Nargis786
    Quote:

    Originally Posted by Perito View Post
    if the consumption is rising exponentially, you will see





    So, if you plot log(consumption) against log(T), you should get a straight line. The slope of the line is the exponent.

    sorry i do not understant this fully, please would you be able to explain it further
  • Jun 14, 2009, 04:01 PM
    Perito

    Just do the plot (log(consumption) against Log(time)) and see if the graph is linear. You'll understand when you see it.
  • Jun 14, 2009, 04:11 PM
    Nargis786
    Quote:

    Originally Posted by Nargis786 View Post
    sorry i do not understant this fully, please would you be able to explain it further

    OK thank you I understand now. However I also posted something on u-values and another post with the title energy, power, latent heat and specific heat capacity. Please can you help me on those
  • Jun 14, 2009, 04:14 PM
    Perito

    I'm not familiar with the "u-value" terminology. Does u=1/R?
  • Jun 14, 2009, 04:17 PM
    Nargis786
    Quote:

    Originally Posted by Perito View Post
    I'm not familiar with the "u-value" terminology. Does u=1/R?

    I am not really sure about this myself. Can you just help me on the other post I asked about please which is energy, power, latent heat and specific heat capacity
    if you are not able to do the u-value. Thank you

  • All times are GMT -7. The time now is 01:20 AM.