My washer agitates through the wash and rinse cycle fine but will not spin or drain water can anyone help?

If u can hear motor running when in spin cycle, either belt is broken or drive wheel is broken.

Chuck

Thanks Chuck but I don't hear anything. When I move the dial to the wash cycle and the rinse cycle and then pull out, it starts agitating. But when I push in and move to the end of those cycles pull out nothing happens. Same at spin cycle. No noises at all. It is 12 years old may be time for new.

If u have more than one wash cycle, did u try spin in other cycles?

When in spin cycle do u get a burning smell?

Chuck

Quote:

---

Originally Posted by creahands

If u have more than one wash cycle, did u try spin in other cycles?

When in spin cycle do u get a burning smell?

Chuck

---

Chuck, no, I hear nothing. It just sits there. I have tried all the cycles. Thank you

Either the switch or motor has burned out.

More than likely it is the motor.

Chuck

Most likely the lid switch is broken.

Quote:

---

Originally Posted by creahands

either the switch or motor has burned out.

more than likely it is the motor.

Chuck

---

Thank you for all your help Chuck!

Quote:

---

Originally Posted by pokefan7790

most likely the lid switch is broken.

---

Thank you Pokefan!

So what happened... was it the lid switch or the motor?

Some times there would be some chocked up in that due to which such problem is occurring.