How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)

Quote:

---

Originally Posted by peggy_collins

How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)

---

Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom

Quote:

---

Originally Posted by speedball1

Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom

---

Thanks so much, Tom, I will try it and let you know what happens. It is a relatively new water heater so I'm hoping the elements are OK.

Peggy

It's not lengthy.. water heater has just quit working. Only 3 years old.. what's up?

State Industries | Residential | Gas Water Heaters