I am redoing the tile in my bathroom and would like to move the bath tub around to where the drain is on the other end. So my question is can I run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub?

Quote:

---

Originally Posted by decisis_34

I am redoing the tile in my bathroom and would like to move the bath tub around to where the drain is on the other end. So my question is can i run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub?

---

Are you replacing a left hand tib with a right hand one or visa-versa because you just can't pull the tub and reverse it. Regards, Tom

I was planning on putting a new tub in. The tub I have now is a right hand drain tub and I wanted to replace with a left hand drain tub or a drop in tub. The reason I wanted to do this is because I wanted to get rid of the wall that has the water pipes coming in from the attic and place them on the wall on the opposite side.

Quote:

---

is can I run from the waste and overflow assembly to the pipe that's in the ground on the other side of the tub by running underneath the tub

---

Since the tub waste connects beneath the floor line were you planing on platforming the tub? Cheers, Tom

Yes, after the overflow assembly I hoping that I will be able to run a pvc pipe right under the tub to the pipe that is already in the ground.