How do you wire multiple lights using a 3 way switch? I wired multiple lights using a 3 way switch and when I turn on the switch, the lights are dim. What did I do wrong?

You probably wired the lights in series. The lights need to be wired in parallel. The diagram shows how they should be connected. Don't forget the green or bare wire (not shown).

Quote:

---

Originally Posted by Perito

You probably wired the lights in series. The lights need to be wired in parallel. The diagram shows how they should be connected. Don't forget the green or bare wire (not shown).

---

Thanks, I appreciate your help!

When you say 3 way switch, Are you connected to 2 3way switches or just one?

I am installing multiple lights between 2-3way switches

Ok, just checking. Then Perito's diagram would be correct

Thank you for your help!