Hi, I'm currently undertaking a design project and I'm trying to find out what kind of valve they use in flick mixer taps/faucet mixer taps like these:

http://http://www.getstuff.com.au/me...ware-mixer.jpg

It'd be of great help if someone knows, and a section drawing would be immensely helpful as well!

Thanks,
Moe


Sorry that above link didn't work, I meant these kinds:

http://www.chinatraderonline.com/Fil...3411982105.jpg

We need a brand name to help. What's that "gear shift lever" for? Regards, Tom

Say a Flick Mixer for example:

http://http://i44.photobucket.com/al...art/tap-f1.jpg

http://http://www.oztion.com.au/-Fli...n/3375701.aspx

I don't know what the valve used or the internal structure of these taps are..

I think knowing the structure would help towards my current project.

In context, pretty much what I'm trying to achieve (if possible) is making two shower control rings and as a really basic rough sketch here below:

http://img188.imageshack.us/img188/7...owerringsj.jpg

An outer ring controls the temperature by adjusting the proportion of hot water and cold water going to the shower, pretty much - by turning left or right.

The inner ring controls the flow of water to the shower - by turning left or right.

I was suggested thermostatic or rotary valves might help do the job but what would you recommend?

Sorry the above image didn't show up again!

http://i44.photobucket.com/albums/f4...art/tap-f1.jpg

Do you mean "what kind of cartridge" is used in Single Column faucets like the one you posted above ?
The one you posted looks like it is Delta brand. New Delta cartridge looks like this: