Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Honeywell T874G to Hunter 44860 (https://www.askmehelpdesk.com/showthread.php?t=356001)

  • May 20, 2009, 09:30 AM
    Sirecks
    Honeywell T874G to Hunter 44860
    Hey All,

    Okay, so I have a Honeywell T874 G 2004 that I am trying to replace with a Hunter 44860.

    From my old Honeywell, here was the set up:

    W2 - White
    C - Blue
    G - Green
    R - Black
    O - Orange
    Y - Yellow

    I'm running a2 stage heat pump. With the different variations of wiring set up tries, I can't even get the fan just to turn on. I've got the "HEAT PUMP" mode on, and the furnace to "ELECTRICAL" on the new one.

    I currently have the Hunter set up this way:
    OLD - NEW
    W2 --- W2 - White
    C ----- C - Blue
    R ----- RC/R - Black (with red jumper to RH)
    O ----- O - Orange
    Y ----- Y1 - Yellow
    G ----- G - Green

    Absolutely nothing is happening. Any help at all would be appreciated.
  • May 20, 2009, 10:30 AM
    Sirecks

    To add fuel to the fire, I've not reconnected the old Honeywell, and now that one doesn't work. This morning, everything was fine, and now after fiddling, it appears the whole electrical system is dead for the a/c. All my breakers are good in the master breaker box.

    Now I'm really confused.
  • May 20, 2009, 11:42 AM
    Sirecks

    Okay, I found my 5 amp fuse blown on the unit inside the house. So, I'm off to replace that, and turn in the Hunter for the Honeywell replacement.

    I'll update if I need any more help.

    Kind of funny, all this.. . Answering my own questions.
  • May 20, 2009, 02:01 PM
    Sirecks
    Bought the Honeywell, replaced the fuse, hooked the wires up, set the Honeywell to match my set up, and it's working fine. Sorry to take up electrons with this.

    Thanks.
  • May 20, 2009, 08:40 PM
    wmproop
    Good job,, it was smart to not use the Hunter,, junk-junk-junk

  • All times are GMT -7. The time now is 12:58 AM.