Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Furniture (https://www.askmehelpdesk.com/forumdisplay.php?f=133)
-   -   Finish (https://www.askmehelpdesk.com/showthread.php?t=355998)

  • May 20, 2009, 12:12 AM
    montela
    Finish
    Want to refinish a night table. It has a veneer coating which has cracked and chipped. I'd like to get it off.
    Any suggestions,
  • May 20, 2009, 07:41 AM
    ballengerb1

    You want to remove the whole veneer or the finish?
  • May 20, 2009, 08:43 AM
    Dave-Morris
    The wood under the veneer is called secondary wood---you will need to replace the veneer is you remove it.
    And removing it---the veneer has been glued on---is most easily done by sanding it off. That will be prohibitively expensive in sandpaper and mess.
    ____________________
    stairlift San Francisco
    driveway gates los angeles
    los angeles garden design
    home wiring los angeles
  • May 20, 2009, 09:24 AM
    Fr_Chuck

    Moved to furniture
  • May 20, 2009, 03:45 PM
    ballengerb1

    I am waiting for Montela to explain further.
  • May 22, 2009, 01:03 AM
    Clough

    Hi, montela!

    If it is the veneer that you're wanting to remove, then I would suggest using an old iron that you don't mind getting adhesive on with damp cloths to then create steam to loosen the adhesive that's affixing the veneer and then scraping the veneer off with a flexible putty knife.

    One of the things that I do for a living is to refinish and re-veneer furniture.

    Thanks!

  • All times are GMT -7. The time now is 03:24 PM.