Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Resistor switch on 98 Venture (https://www.askmehelpdesk.com/showthread.php?t=347097)

  • Apr 28, 2009, 07:17 AM
    AJMC
    Resistor switch on 98 Venture
    Please advise how to exchange a resistor switch on 98 Chev Venture... does not work on speed 1 & 2.. Thank you Arnold
  • Apr 28, 2009, 08:11 PM
    CaptainRich

    Remove the panel under the dash on the front right side.
    Looking up, the resistor is mounted into the HVAC plenum, held by three small fasteners.
    Disconnect the connector and remove screws and then the resistor.
    Reinstall the new one but don't overtighten the fasteners.
  • Apr 29, 2009, 03:15 PM
    AJMC
    Quote:
    Originally Posted by CaptainRich View Post
    Remove the panel under the dash on the front right side.
    Looking up, the resistor is mounted into the HVAC plenum, held by three small fasteners.
    disconnect the connector and remove screws and then the resistor.
    Reinstall the new one but don't overtighten the fasteners.
    Thank you , I can se the resistor but unable to reach the screws.. do I have to remove the blower??

    • All times are GMT -7. The time now is 06:55 AM.