Hi, I have a slow leak from the tiolet water basin into the bowl. I know that the water level line on the basin inlet is being exceeded to the point where the water in overflowing into the inlet tube. I don't know how to manipulate the float so that the basin doesn't fill up so high. It's a kohler Fluidmaster float setup if anyone has any ideas? Thanks

Click on; http://www.toiletology.com/troubles.shtml To bring up a diagram of a fluiudmaster Ballcock You will see a adjustment clip on the float. Pinch it and lower the float to lower the tank level and raise the float to bring the tank level higher. Regards, Tom