Have a husky power washer that has little pressure. Tried different wands so that's not it.
![]() |
Have a husky power washer that has little pressure. Tried different wands so that's not it.
The wand is never the pressure problem that way. Its either a pump seal or low inlet from water source to machine.
Did you check the filter screen no#11 on the parts drawing
Hears the operating manual for your machine in case you lost yours.
http://www.huskypowerwasher.com/pdf/H2000.pdf
Husky Powerwasher
Again its basics here Filter/water supply/ pump seals.
All times are GMT -7. The time now is 03:25 PM. |