Recently installed 1 knob shower faucet made by price pister .
Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong .

Any ideas on how to get more pressure from shower.

Thanks for any info,

Ryan

p.s. I used 1/2 copper

Hi Ryan,

Half inch copper's fine. There's a water saver in the shower head that cuts down on volume and pressure. Unscrew the shower head and you will see a round rubber washer with holes around the edge.l Pry it out, toss it, reinstall and rub-a-dub under a full stream. Happy showering! Tom

Hi speedball.

I found the problem, the shower head is labeled 2.0 gpm MAX

I switched it with the bathroom downstairs and prob fixed (we don't use the basement bathroom yet)

So again thanks for your help.