I have a Directv HD/DVR. It is a dual tuner box and I know it can record one show while I watch another. I have two tvs and have them both hooked up to the box.

How can I set it up so that I can watch one channel on one TV and another channel on the second TV?

Thanks

I don't think that's possible.
If it is, you should have the manual for the box that should tell you how its done.

Are you able to record from 1 tuner? If so then tune in second tuner for second TV.
Should be possible.

You can't do it with Direct TV. The DVR allows you to watch only one channel at a time. As you know you can record two channels at once, and switch back and for the between them, but that's it... only one output at a time.

Then they shouldn't call it a "Dual Tuner",
With Dish's Dual Tuner, you can watch 1 and record another.

You can watch one and record another with DirecTV as well... just can't separate the tuners output to watch on two televisions.

If I built the Box, it woud have separate outputs for each tuner. Big Companies Squeak, Likely you would have to have 2 dual tuners to do what you want.
Are they Stupid or does money make them stupid(we can sell 2 dual tuners)Idiots.

Hmm... just wondering... why would anyone want to watch two shows at the same time?

Can you record both channels?

Yes you can.

That's good anyway, I could maybe see a want for 2 different Displays.
Sometimes, their will be a MUST KNOW life saving news on a show, they make you wait the whole show, and it may be at the end. Watch your regular show and glance to see the Important Life saving News when it shows up.

I've got two TVs side by side have them both hooked up to DirecTV as well as basic Comcast..

There are sometimes two soccer games I want to watch at the same time but are both only available on DirecTV.. The way the DirecTV box works both TVs show the same channel when tuned to DirecTV..

I was hoping there was a work around enabling me to divert the signal from on of the tuners so that I could watch two different channels at once..

For example I can record channel A and B at the same time but at any one time only one of channel A or B will be output to both TVs.. Since the box is accessing both channels I thought there might be a way to divert the second signal..

Would be nice if it had outputs for both?