I have a Cinderblock pool house. I want to open it up more by cutting sections of the wall. How can I do that

Hi david

We would need more info.

How many openings? Size of openings? Are roof rafters resting on any of the walls u want to open?

Answer these questions and we should be able to help u

Good luck

Chuck

You will need pre cast concrete lintels for any opening you make wider or new. Min bearing for the concrete lintels should be 4" or more.

Also temp supports may need to be erected depending on the opening sides to temp support truss depending on the side of the building you are cutting.

To cut the wall a concrete cutoff saw would be used here. 12" or 14" diamond blade is the ticket. The rental store should have it.
Northern Industrial Gas-Powered Cutoff Saw — 3.6 HP, Model# EHS350A | Concrete Saws | Northern Tool + Equipment

It also may come with a water hose connection on it. Which keeps the dust down. Use a good mask to cut.

Better details could help here. Do what you are asking all time.

If you've never done this type of work or project before, make double sure to really look into it all the Hazards and safety precautions one must take in every phase, CHECK BUILDING CODES ETC.

HERE'S A SMALL LIST:
Noise levels---ear protection.
Dust particles---Lung protection FACE MASK.
Flying debree and Particles---Eye Protection.
Falling of heavy Objects---Steel toed boots
Moving parts,pinch or crushed fingers---Wear Proper Gloves.
Electrical shock---Proper Wiring being careful around pool area and tripping hazards.