Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Burner does not stay on for a Lennox furnace (https://www.askmehelpdesk.com/showthread.php?t=340651)

  • Apr 12, 2009, 03:44 PM
    hammer934
    Burner does not stay on for a Lennox furnace
    I have a lennox 1994, 80% ignition, furnace. I am having a problem getting the burner to stay on until the house reaches the specified temperature. When the burner shuts down, the blower keeps running. In order to get the burner to kick on again, I have to fool with the thermostat such as turning it down below the actual temperature in the house, wait a few minutes and turn it back up, at which point the burner will kick back on for a few minutes but then it will shut off again and I have to go thhrough the process all over again.
    What is the problem? Please help.
  • Apr 12, 2009, 03:47 PM
    Joshdta

    Sounds like you are having a problem with your limit switch
  • Apr 12, 2009, 03:47 PM
    Joshdta
    How is your air filter?
  • Apr 12, 2009, 04:17 PM
    mygirlsdad77

    Try leaving the thermostat turned up, now check at furnace to see if flame goes on and off, and back on(over and over again) over a period of say five to ten minutes. There are a few options for your problem, but I would start here first. Let us know what you find and we will try to help further.

  • All times are GMT -7. The time now is 09:34 AM.