Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Gas Dryer Flame will not light (https://www.askmehelpdesk.com/showthread.php?t=337876)

  • Apr 4, 2009, 04:39 PM
    Bob Blacker
    1 Attachment(s)
    Gas Dryer Flame will not light
    Whirlpool LGR5636PQO
    Cleaned exhaust; good air flow
    Replaced igniter and flame sensor
    Still no flame?
    Please advise next items to check or replace
  • Apr 4, 2009, 07:04 PM
    EPMiller

    Check the gas valve coils. Usually they are the culprit. I don't know what they should measure (ohms) when they are good, but when we can't get ignition on a gas dryer, that's usually what the problem is. Measure the resistance of the new ones and write all the numbers inside the dryer on the sheet metal somewhere. A Sharpie works well. Then you will know it the next time you have problems.

  • All times are GMT -7. The time now is 09:50 PM.