My hot water automatic shut-off valve on my washing machine started gushing water. So I figured no problem, I would turn off the water at the in-wall manual shut off valve for the washing machine. But even when I turn it all the way off, it leaks. It leaks into the hose going to the washing machine and eventually the washing machine fills up with water.

I've taken photos of the shut-off valve so you can see the exact type.

I don't know anything about plumbing, so please be as specific as you can. And, please, if this is a fix where I need to turn off the main water valve into the entire house, please let me know that.

Once you open this page, you can click on the image that comes up to get an enlargement:
http://i40.tinypic.com/zlw36a.jpg

Thank you very much for any assistance.

If the stop's leaking then it's a good bet the washer's shot. To replace the washer shut the water off at the house shut off and open the stop 1/4 turn. Take a wrench and unscrew nut# C. This will give you the stem and washer assembly. Take the washer or the assembly in and replace the washer. But before you do that check the seat for nicks or rough spots if you find any the valve must be replaced. Good luck, Tom

You have two different valves both leaking on the same line. The washer has a solenoid operated valve that is not closing all the way. The spout you show in the pic has a bad washer. The spout is the easiest to fix but both should be addressed. Did you notice both A and B are pointing at the same nut? Lets start by finding the house main and closing it, with your luck it will leak too. Back to you

Like Milo says you have two valves leaking, the wall shut off valve is easy to fix, shut off the main valve to the house, disconnect the hose from the valve use two wrenches hold the body of the valve and loosen the nut marked C turn it counter clock wise remove the stem and take it with you to a plumbing supply store get an new washer and replace it you also need to replace the automatic shut off valve at the machine, good luck.

John

John, I'm Italian now?? LOL

Thank you so much for the answers!!

As for my luck and the house main leaking, fortunately, the water company would have to fix that as that's their shut-off valve and I'll have to get them out here to shut it off so I can do this. (I took a look at it. It's hooked up to cables and a transmitter and I don't want to mess up their equipment.)

I am lost how could it be the water company issue, can some one clearify this for me,Thanks.

John

Hope I can explain it clearly.

My house doesn't have a "house" shut-off valve. The only way to turn the water off to the entire house is at the water meter buried in the front yard. That belongs to the water company.

So, if a homeowner needs the water turned off for maintenance, we call the water company and arrange for them to come out and turn it off and they come back later to turn it back on. (There's no charge).

Years ago, before they hooked up the cables and the transmitter, if you had the correct tool you could turn it on & off yourself. (It required something with a specially shaped head.)

But I checked and that "slot" where the head used to fit is gone replaced (or hidden) by the cables and transmitter. I'm sure a professional plumber knows how to turn it off. But that's not something I'm going to fool with and risk damaging their equipment. So I'll have to call and make an appointment for them to come out.

Hope that clarifies things. Thanks again for the help.

Now I understand your problem, once the water is shut off to your house then you will fix your leaking valves, good luck.

I am not sure in your area if it is allowed to have a shut off valve between your house and the meter if it is allowed I would suggest to install one, Thanks.

John

I would agree that another shut of just inside the house is a wise and safe idea. I would install one right now as soon as they shut you down. Then you can fix you other two faulty valves at your own pace. Like Tom said in post #2 you can fix the supply faucet fairly easily. Your original problem is still the washer and that is most easily fixed by replacing the entire valve and fill solenoid assembly.