Hi,
I recently purchased a Hunter 52" Cedonia fan/light with remote to replace my old ceiling fan/light fixture in master bedroom. After wiring according to instruction manual, nothing is working with the light switch on or from the remote. The light switch is just a single on/off switch.
The wires are as follows:

Light Switch
Red, Black and (2) white that are capped off.

Fan
Black, White, Black/White stripe (Light Out), Green

Receiver
Black (Live In), White (Common In), White (Common Out), Red (Light Out), Black/White stripe (Light Out)

Ceiling
Green, (4) White - 3 are capped off, (4) Black all capped together (main constant power), Red (confirmed this is connected to light switch).

Any help would be very much appreciated as I've been without a bedroom light for over a week now! :-)

Switch connects to the red and black like the old switch.

Fan's 3 wires connect to the set of 3 from the receiver.

The set of 2 from the receiver connect to ceiling white and red.

Ceiling fan wiring - Ceiling Fans N More