While replacing a pull chain switch on my Builders Best 3 speed reversible ceiling fan, I have forgotten how to hook up the wires. I currently have 1 red, 1 black and 1 gray wires coming from the bottom of the fan. The black box thingy(transformer?) has 2 gray wires on one end and a purple, a brown and a red wire on the other end. The new switch has a black, a blue and a dark pink wire on it.
I do remember that the black from the fan went to the black on the switch.
Any ideas?

The old switch, did it have 3 or 4 wires?

Ceiling fan pull chain replacement and repair - Ceiling Fans N More

It had 3 wires.

Try black - L, grey - 1, red - 2

I already had black to L. I had a choice of 2 grays to the black box and 1 to the fan and I had a choice of red to the black box and a red to the fan.
So, I took the black box out and hooked the black from the fan to the L on the switch,the gray from the fan to the 1 on the switch and the red from the fan to the 2 on the switch.

I had to pull the chain 3 times and the fan came on low reverse.

Now that I know that I can switch wires around without blowing up the fan I will experiment with other combinations.

Thank You

You might not have the right pullchain, check my link.

Will you please fix my ceiling fan cause my boyfreind doesn't work and won't fix mine.