I have an old GE motor that I would like to use at 115 volts. This motor is currently wired for 220 volts. The cover plate has the diagram listing the information but is unreadable.

The current wiring configuration is as follows: Tied together are (2,3) (6,7) (5,9) and (8,10)
Leads 1 and 4 are tied to line voltage.

The motor information is as follows: General Electric Tri/Clad 2hp
Model number 5kc213ag210c
Capacitor Motor

The only thing that is readable on the cover plate, shows for low voltage that line and leads 1 and 3 are tied together. I hope that someone can help me with the correct connection diagram.

Thanks

I have an GE motor model 5KHB5GN106CX. How to rewired reverse to clockwise. It run counter clockwise now. It this motor able to reverse.
Thanks