Need the cap wiring diagram they changed from one cap with three connections h c m to a dual run capacitor that has two common posts with four terminal each and a separate cap with two posts of two connections. The wiring diagram shows two caps a dual run with three post and a start cap.
Any help would be great Thanks

I just said it to someone else, I'll say it again. Your sentence construction and punctuation are such that I can't make much out of your question. As best I can tell, you used to have a dual capacitor and now you have two single ones and wonder how it should be wired. You can think of a dual capacitor as two singles in one can. The common terminal on the dual is doing the job for one of the terminals on each single. Assume the terminal with the paint dot is the common. Run a jumper between that terminal on the singles and then wire it into the machine like the old dual.

Possibly I missed some of what you were asking because your explanation of the problem was very unclear. Please come back with a much clearer explanation or post some pictures if you can't get it down clearly in words. Then maybe we can be of better help.

EPM