Originally Posted by
speedball1
What your tenant did when he plunged the toilet is move the clog outta the toilet and on further down the line where it's now backing up outta your tub. You have several options here.
You can snake the drain from the lavatory roof drain. Put out enough cable to reach the base and 16 feet more. **or**
You could remove the tub waste and snake from there.,(see image) Unscrew and remove the overflow plate,(The one with the drain lever) and pull out the tub stopper. You now have a clear shot at the trap. The way you were going in through the drain it ran you square into a tee that you can't get around. Now feed the cable( 1/4" best or 3/3" with a small tip. You can rent a Ridgid K50 sink cable.) About 2' down you will run into the bend of the trap. Crank and push at the same time to work around it. Your blockage will be found in the lateral pipe going to the stack. Good luck and thank you for rating my answer.